List of Commands

Name	Parameters	Synopsis
!	[ NUMBER ]	Re-execute previous command from history.
!!		Lists the last commands, last command last, and their number in the list.
#	[ COMMENT ]	Same as c.
*	SENTINEL	Execute special section from command file.
/	COMMAND	Add command after “/” at the end of command file.
<j>	[ (i [ IONSYM ] ) | ( ( b | b ) [ ISOSYM ] ) | q ]	Make a current edit for zone <j> on the terminal.
?	EXPRESSION	Evaluate expression.
@	EXPRESSION	Evaluate logical expression.
Y	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass of all isotopes (Msun).
YA	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot decayed mass of all isobars (Msun).
YD	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass of all stable isotopes after decay (Msun).
YDA	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass of all isobars after decay (Msun).
YDE	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass of all elements after decay (Msun).
YE	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass of all elements (Msun).
Ye	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot decayed mass of all elements (Msun).
adapnet		Manually call subroutine adapnet to adapt network.
addatmos	NATMOS RHOATM1 [ TEMPATM ]	Add an isothermal, exponential atmosphere to the surface of the star.
addiso	( ISOSYM ) +	Add the detailed isotopic abundances listed to those to be plotted by the “plot 6” or “look 6” commands.
addsurf	[ MSURF | ( NSURF TMSURF TEMPSURF RHOSURF VELSURF [ [ AWSURFX AWSURFY ] AWSURFZ ] ) ]	Add isothermal surface zones with specified properties.
addwind	NWIND WINDMASS RATEWIND VELWIND [ VESCMULT [ TEFFWIND [RADPWIND [ [ AWWINDXAWWINDY] AWWIND ] ] ] ] ]	Add wind surface zones.
adzone	ZONE	Manually adzone zones ZONEZONE1 to zones ZONEZONE2.
alias	NAMEA “COMMAND-STRING”	Define alias.
alliso		Generate a BURN network that contains all isotopes from the bdat file (plus p, n, he4).
approx	[ JLO [ JHI ] ]	Convert zones to APPROX netwrok.
arange	NSTART NEND	Set the mass number range for BURN isotope plots.
bounce	XCUT TMIN RMIN RMAX ALPHA [ cut] [ scut ] [ accel ]	Generate piston (pst cards) from analytic formula.
bstat		Print out current BURN statistics and timing information.
burn	DATAFILE	Do BURN processing of zone 1 according to provided history file.
burnaclr		Reset the recording of maximum abundances of BURN network.
burnamax		Print the maximum abundances reached in the BURN network.
burnaplt		Plot the maximum abundances reached in the BURN network.
burncplt
burnmplt
bye		Same as end.
c	[ COMMENT ]	Comment - ignored.
chngcomp	ZONE ZONE [ ZONEORG | ( FIRSTION# ( MFRAC )+ ) | ( MFRAC ION )+ ]	Change the composition in zones JMIN through JMAX.
clampvel	VELOCVITY	Limit magnitude of velocity.
closewin		Close the graphics window.
cmd		Print current command file to screen.
cmddbg	[ VALUE ]	Switch on or off debugging for command file functions.
cmdfile		Print current command file name to screen.
cnviso	ISO_FROM ISO_TO FRACTION ZONE_START ZONE_END	Convert fraction FRACTIO of BURN isotope ISO_FROM to BURN isotope ISO_TO in zones ZONE_START to ZONE_END.
compsurb	[ ( FIRSTION# ( MFRAC )+ ) | ( MFRAC ION )+ | ZONEORG | clear | show ]	Set the mass fraction values in the compsurfb array.
compsurf	[ ( FIRSTION# ( MFRAC )+ ) | ( MFRAC ION )+ | ZONEORG | clear | show ]	Set the mass fraction values in the compsurf array.
copycomp	ZONEORG	Setup xnwcomp array by copying the composition information from ZONEORG.
core	[ COREXLIM [ COREFELM ] ]	Show core information on screen.
cpzone	ZONE_FROM ZONE_TO_LOW ZONE_TO_HIGH [ MODE ]	Copy composition from zone ZONE_FROM to zone range specified by ZONE_TO_LOW and ZONE_TO_HIGH.
cut	ZONE	Cut out the inner ZONE zones.
cutbin		Manually truncate binary output files to current cycle.
cutsurf	[ ZSURF ] [ - | + ]	Remove zones outside ZSURF from the surface of the star.
d	[ FILENAME ]	Make a restart dump.
datafile		Print datafile hashes to tty.
datapath	[ PATH | clear ]	Set or enquire path to data files.
debug	[ VALUE ]	Switch on or off debugging mode.
decayni		Convert all APPROX ni56 to fe54 in such a way as to conserve mass, but with no energy generation.
def	NAME VALUE	Define optional user-defined (‘O’) parameters.
del	NAME	Delete optional user-defined (‘O’) parameters.
det	JDET0 JDET1 ENDET	Simulate the passage of a detonation wave.
dev	NAME VALUE	Default value for optional user-defined (‘O’) parameters.
dezone	ZONE [ - ]	Manulally dezone zones ZONEZONE2 to zones ZONEZONE1.
dumpsrc	[ DIRECTORY ]	Print or store the dump source code (if included).
e		Make an energy edit on the terminal.
ed	[ MEDIT ]	Force an edit of the current cycle to be written in the ASCII output file.
edep	JDET0 [ JDET1 ] ENDET	Add specific energy to specified zones.
ediso	[ JINNER [ JOUTER ] ]	Make an edit of the isotopic yields, summed between zones JNNER and JOUTER inclusive.
editiso	[ JINNER [ JOUTER ] ]	Same as ediso.
edp		Force a parameter edit for the current cycle to be written in the output file.
end		Terminate the problem.
enucb	ZONE TEMPERATURE DENSITY TIMESTEP	Edit the temperature, density, specific energy generation rate (neutrino losses applied), its temperature and density derivatives, the opacity and its temperature and density derivatives.
eostab2	ZONE TLOW THI NTEMP DLOW DHI NRHO	Write out table for EOS with derivatives and opacities.
eostable	ZONE TLOW THI NTEMP DLOW DHI NRHO	Write out table for EOS and opacities.
eostrans	transmult	Add TRANSMULT times the energy in nuclear excited states to all zonal specific energies.
exit		Same as end.
fin		Same as end.
flowb	ZONE ( TEMPERATURE | - ) ( DENSITY : - ) ( TIMESTEP | - ) [ RADIUS | + ] [ ( FILENAME | - | matrix ) ]	Edit BURN nuclear reaction flow data.
g		Resume normal calculations after a suspension.
genburn	[NAMEBG]
git		Print source git repository sha-1.
halt		Same as end.
initdata		Reset initialisation status of variable external data files.
k		Same as kill.
kapedit	ZONE TLOW THI NTEMP DLOW DHI NRHO EPS	Write out table for EOS and opacities.
kill		Immediately terminate KEPLER without the usual “shutdown procedure.”.
killburn		Turn off and removes the burn co-processing.
killpist		Reset/terminate piston.
killye		Same as ye clear.
link	namelink	Read and execute the LINK file.
lista		List all aliases, including those not yet defined (which are denoted by “null”). ‘.
listiso		List the current set of BURN species to be plotted as set by the setiso command.
m	( EDITVAR )+ [ AXISYL [ AXISYR ] ]	Same as mon command except that mongo is quit immediately after making the plot.
mapburn		Map BURN abundances to APPROX.
mapsurfb		Map compsurfb array to compsurf array.
mix	[ NZMIN NZMAX ] DLTMASS [ TERMINATE ]	Simulate mixing due to RT instabilities.
mixcycle	[ INEW ]	Perform mixing/diffusion operation using current coefficients.
mixdiff	[ NZMIN NZMAX ] DLTMASS [ TERMINATE ]	Simulate mixing due to RT instabilities using diffusion approach.
mlim	[ ( [ YMLOW ] YMHI ) | old ]	Set lower and upper limits on the relative mass coordinate used in making plots and timemaps to YMLOW and YMHI (in units of Msun).
mode		Echos whether KEPLER is in interactive mode or not.
mon	( EDITVAR )+ [ AXISYL [ AXISYR ] ]	Make an X-Window MONGO plot.
mongo	( EDITVAR )+ [ AXISYL [ AXISYR ] ]	Same as mon.
monpl	( EDITVAR )+ [ AXISYL [ AXISYR ] ]	MONGO plot is printed in landscape mode on the local laser printer.
monpp	( EDITVAR )+ [ AXISYL [ AXISYR ] ]	MONGO plot is printed in portrait mode on the local laser printer.
newbin		Delete all output files (*.cnv, etc.) and reset all convection plot and wind parameters and version numbers to current default values.
newe		Calculate new internal energies from current densities and temperatures.
newnetb	FILENAME	Generate new BURN network from file FILENAME.
newt		Calculate new temperature current internal energies and densities.
nflux	TBOUNCE FLUXNU0 A0 CHI0 Al CHI A2 CHI2	Neutrino Flux Card.
note	[ [ INDEX ] NOTE | del | delete | ck:- ] | [ del | ck:delete | - [ INDEX ] ] | [ clear ]	Add, show, or delete current run notes.
novamix	DELTAM	Mixing for nova test scenario.
null		Do nothing.
o	[ NAME [ VALUE [ OPERATION ] | ( VALUE [ def | dev | redef | @ | & | ^ ) | ( del | # ) ] ( OPERATION | @ | & | ^) VALUE ] | VALUE list ]	Obtain/set/define/delete optional user-defined (‘O’) parameters.
p	[ ( PARAMETER [ ( .. PARAMETER ) | ( VALUE [ OPERATION ] ) ] ) | ( LISTVALUE [ list ] ) ]	Edit changable (‘P’) parameters.
pf	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot production factor of all stable isotopes relative to solar after decay.
pfa	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot production factor of all isobars relative to solar after decay.
pfe	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot production factor of all elements relative to solar after decay.
pist		Show piston data.
pl	[ NPLOT ] [ FILENAME ]	Make a PostScript plot of the current problem status in landscape orientation.
plot	[ NPLOT ]	Make an X-Window plot of the status of the current problem of the type specified by plot number NPLOT.
pp	[ NPLOT ] [ FILENAME ]	Samme as printp.
printl	[ NPLOT ] [ FILENAME ]	Same as pl command.
printp	[ NPLOT ] [ FILENAME ]	Make a PostScript plot of the current problem status in portrait orientation.
prncomp		Print the content of the xnwcomp array.
pst	( TIME INNER-RADIUS ) | clear	Piston Cards.
pt	[ NPLOT ]	Sampe as plot.
pulsar	PSRMB	Print the estimated pulsar rotation rate.
pulsedit	FILENAME	Write out pulsation edit file needed by Isabelle Baraffe’s code.
pulsednr	FILENAME	Write out pulsation edit file needed by Jeremiah Murphey’s code.
q	[ PARAMETER [ .. PARAMETER ] ]	List edit (‘Q’) parameters.
qset	QPARM VALUE	Overwrite value of q parameter.
quit		Same as end.
r	[ N | - ]	Suspend execution, or resume stepping of cycles if suspended.
rateb	TEMPERATURE DENSITY	Edit the BURN reaction rates.
ratenub	R9 TIME	Edit the BURN neutrino reaction rates.
reset		If BURN co-processing is being done, reset the timen array and take a small time step by setting dtimen to dtfrac (p 230) dtnew (p 1).
resetacc		Reset accretion parameter xmacc (q 124) to 0..
resetdec		Reset deretion parameters xmdec (q 129) and decmass (q 130) to 0..
resetuse		Reset used times to zero.
resetvnm		Reset velnegm (q 97) to 0..
s	[ N | T | - | ? ]	Suspend execution, or step cycle if suspended.
setcomp	( FIRSTION# ( MFRAC )+ ) | ( MFRAC ION )+ | ZONEORG | clear | show	Set the mass fraction values in the xnwcomp array.
setcycle	NCYC	Change the cycle number stored in ncyc (q 4).
setiso	ISOSYM{1,50}	Sets the detailed isotopic abundances to be plotted by the “plot 6” or “look 6” commands.
setspin	VALX | ( VALX VALY VALZ ) [ mult | div | w | k | K | V ]	Change total angular momentum of star.
solidrot		Bring the star to solid body rotation.
source		The source hash of the current KEPLER binary.
src	[ DIRECTORY ]	Print or store the executable source code (if included).
stop		Same as end.
store	NSDIRECT	Set the directory into which ASCII output files and labeled restart dumps will be written to NSDIRECT.
sumb	[ ( ISOSYM+ [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [ISOSYM+] ) ]	Display an edit of the mass fraction of BURN species.
sumbg	[ ( ISOSYM [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [ISOSYM] ) ]	Display an edit of the mass of BURN species in g.
sumbsun	[ ( ISOSYM [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [ISOSYM] ) ]	Display an edit of the mass of BURN species in Msun.
sumi	[ ( IONSYM+ [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [IONSYM+] ) ]	Display an edit of the mass fraction of APPROX / ISE / NSE ions.
sumig	[ ( IONSYM [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [ISOSYM] ) ]	Display an edit of the mass of APPROX / ISE / NSE ions in g.
sumisun	[ ( IONSYM [ ZONE [ ZONE ] ] ) | ( ZONE [ ZONE ] [ISOSYM] ) ]	Display an edit of the mass of APPROX / ISE / NSE ions in Msun.
system	”COMMAND-STRING”	Execute the system command COMMAND-STRING.
t		Make a current time edit on the terminal.
ted	[ MEDIT ]	Displaya ‘short’ ASCII edit on the terminal.
test	TESTVAR ZONE T D	Gives a terminal edit of quantity TESTVAR for the materials in zone ZONE, but at the temperature T in K and density D in g/cc specified.
time		Make an edit of computer time usage (sec).
tn	REACSYM	Make an edit of the total rate of nuclear reaction REACSYM on the terminal.
tq		Make a combined time and surface edit on the terminal.
unalias	NAMEA | all	Remove the previously defined alias NAMEA.
updateq		Update or discard NSE/QSE isotopic data after changing nserec (p 599).
uuid		Print current UUID info.
v	EDITVAR [ JMIN [ JMAX ] ]	Make a terminal edit of the zonal edit variable denoted by EDITVAR from zones JMIN to JMAX, inclusive.
ved	EDITVAR [ JMIN [ JMAX ] ]	Make a ASCII-output-file edit of the zonal edit variable denoted by EDJIVAR from zones JMIN to JMAX, inclusive, similar to z command.
vers		Type out information about the current KEPLER version and compile info.
vf	EDITVAR [ JMIN [ JMAX ] ]	Same as the v command except that edited values are given to 14 decimal places instead of 3.
vfed	EDITVAR [ JMIN [ JMAX ] ]	Same as the ved command except that edited values are given to 14 decimal places instead of 3.
weightb	TEMPERATURE	Print the BURN statistical weights.
wind		Print the APPROX wind information to the screen.
windb		Print the BURN wind information to the screen.
write	( * FILENAME ) | ( FILENAME [DATA`[:ck:::vs:`FMT ]] [DATA`[:ck:::vs:`FMT]] [ … ] )	Write provided data to text file.
x		Write out dump file then end KEPLER.
y	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass fraction of all isotopes.
ya	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot yield of all isobars.
yd	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot mass fraction of all stable isotopes after decay.
yda	[ approx | burn | wind | ( ZSTART [ ZEND ] ) ]	Plot yield of all isobars relative after decay.
ye	( ARBITRARY INTERIOR-MASS YEQ0 ) | clear	cards for ISE initialization.
ylim	[ YLLOWMON YLHIMON [ same | ( YRLOWMON YRHIMON ) ] ]	Sets the y-axes limits on MONGO plots.
z	( EDITVAR )+ [ JMIN [ JMAX ] ]	Makes a columnar zonal edit of up to ten EDITVAR arrays.
zed	( EDITVAR )+ [ JMIN [ JMAX ] ]	Makes a columnar zonal edit of up to ten EDITVAR arrays and write to ASCII file. Same as z command otherwise.
zero		Reset all relevant parameter as if stating a fresh run.
zerotime		Set the problem time, time (p 0), to 0..